News:

If you would like to make a Paypal donation to support this forum, click on this button

Main Menu

Valve Clearance Work Sheet ( ST1300 )

Started by KoTAOW, January 16, 2012, 10:31:05 AM

Previous topic - Next topic

KoTAOW

Original article can be found here:  http://www.st-owners.com/forums/showthread.php?72139-ST1300-Valve-Clearance-Worksheet

Contributed by John Hudson, aka GitSum, STOC #8086.

~~~

Valve Clearance Work Sheet ( ST1300 )

I made up this worksheet to help me keep my valve clearances straight. The idea is to record the actual valve clearance in the little white box for each valve. Also at the bottom is a real quick review on the procedure.

Here is what it looks like (low res)


I wanted to add, since it is a little hard to see in the lower left corner of the worksheet.

The easiest way for me to tell that the #1 cylinder was at Top Dead Center (TDC) on the compression stroke was to look at the lobe for the #1 exhaust valve. It should be pointed up like this. Remember, the piston also comes up to TDC on the exhaust stroke and you need to make sure your on the compression stroke.


ST1300 Valve Worksheet in PDF can be downloaded below.

~~~

Thank You again for your contribution John Hudson, aka GitSum, STOC #8086