Title: Radiantz® Mirror Signals ( ST1300 )
Post by: KoTAOW on October 19, 2011, 06:50:20 AM
Post by: KoTAOW on October 19, 2011, 06:50:20 AM
Original article can be viewed here:
http://koczarski.com/ST1300/TurnSignals/Signals.htm
Written by by Adam Koczarski, STOC #265:
~~~
The LED array is about 1.5" long. Clear plastic with amber LEDs.
You can order them here at Radiantz® (http://www.radiantz.com/).
I routed the wires as shown through the holes in the mirror support.
Here are the signal wires. The green is ground and the solid colored wire in the other connectors is the positive lead.
I used Posi-Lock® (http://www.posi-lock.com/) connectors to make the required connections.
The finished product. It's a time lapsed photo without a tripod. Not too clear. Sorry!! They are nice and bright though!
~~~
Thank You again for your contribution Adam Koczarski, STOC #265
http://koczarski.com/ST1300/TurnSignals/Signals.htm
Written by by Adam Koczarski, STOC #265:
~~~
Radiantz® Mirror Signals ( ST1300 )
The LED array is about 1.5" long. Clear plastic with amber LEDs.
You can order them here at Radiantz® (http://www.radiantz.com/).
I routed the wires as shown through the holes in the mirror support.
Here are the signal wires. The green is ground and the solid colored wire in the other connectors is the positive lead.
I used Posi-Lock® (http://www.posi-lock.com/) connectors to make the required connections.
The finished product. It's a time lapsed photo without a tripod. Not too clear. Sorry!! They are nice and bright though!
~~~
Thank You again for your contribution Adam Koczarski, STOC #265