John Deere, BMW, and HELLA plugs/sockets
Here's some info on PNs, prices (12-2001), and sources:
John Deere:RE11344 / PLUG / $19.75
AL25073 / SOCKET OUT / $14.51 (tethered plastic cap)
MG82002966 / SOCKET / $15.17 (spring-loaded 'flip-cap')
sources: JD lawn tractor and garden equip dealers
Powerlet (Jastek) products:
http://www.powerletproducts.com/ (http://www.powerletproducts.com/)
Available from our old friends at Electrical Connection:
http://www.electricalconnection.com/ (http://www.electricalconnection.com/)
BMW:61 13 8 060 106 / ASSC.PLUG / $9.95
61 12 1 244 589 / STUECK / $18.74
sources: BMW M/C dealers
HELLA:4914 / 2-POLE SOCKET PLUG
4918 / 2 POLE SOCKET
sources/prices (plug / socket):
http://www.warmnsafe.com/Heattrollerpricelist.htm (http://www.warmnsafe.com/Heattrollerpricelist.htm)
$6.95 / $8.95
http://www.widder.com/price_a.htm (http://www.widder.com/price_a.htm)
$6 / $6
http://www.gr8designs.com/PriceList.html (http://www.gr8designs.com/PriceList.html)
$6.96 / $7.95
"BMW" type (I suspect they're HELLA):
http://www.aerostich.com/riderwearhouse.filereader?169156388+EN/catalogs/1178 (http://www.aerostich.com/riderwearhouse.filereader?169156388+EN/catalogs/1178)
Front Wheel Bearings
Honda part numbers: 1991-1996, standard and 1992-1995, ABS
42 mm 6004UU The 42mm bearing:
91054-MAM-003 / BEARING (6004UU) 1997-2002, standard and 1996-2002, ABS
47 mm 6204UU The 47mm bearing: 91052-MT3-004 / BEARING (6204UU)
Comment by
John Oosterhuis, STOC 1058:
All FRONT ST1100 wheels take the same size and part number on both sides, be they 42mm or 47mm.
However, the wheels use different size SEALS.
All ST1100 wheel bearings have an ID of 20mm.
The rear wheel left side, 47mm, single-row bearing on all ST1100s is the same "6204UU" bearing as is used on front wheels.~~~
Rear Wheel Bearings
List of interchangeable
generic bearings for the ST1100 rear wheel:
Fafnir 204KPP
Hoover 99204
MRC 204SZZ
Nachi 6204-2NSL
New Departure 99504
SKF 6204-2RS
NTN 6204LL
The key is the 204, which indicates the size of the bearing. The ND 504 size isn't familiar, either a typo or
ND is trying to pull a fast one on us.
Note: the two rear bearings are different sizes, and this is for only one of them -- the cheaper one. The other is a dual row bearing.
Part numbers for the double row bearing: Honda 91053-MN5-003
MRC 5204 CZZ
~~~
A suggestion on bearings is to try
CBR Bearings (http://www.cbrbearing.com/) in San Diego (800)769-5388. They have lifetime warranty. May not be the cheapest, but everyone says they sell only the highest quality bearings. And still less than at the STealer! They know the ST so you don't need part numbers.
Information provided by
Bill Cruise, STOC 094~~~
Comments by
John Oosterhuis, STOC 1058:
The rear wheel left side, 47mm, single-row bearing on all ST1100s is the same "6204UU" bearing as is used on front wheels.
All ST1100 wheel bearings have an ID of 20mm.
The rear wheel right side, 47mm, double-row bearing on all ST1100s is a "5204RS":
91053-MN5-003 / BEARING (20X47X20.6)
Steering Head Bearings - OEM
Generic bearing part numbers are:
Lower set is 32006JR
Upper set is 32005X
The manufacturer of this particular set was MBS (Japan).
NOTE: The word is that the MBS bearings fit. The Timken 32006X fits in place of the MBS 32006JR but the Timken 32005X and the MBS 32005X do not match even though the p/n's are identical.
~~~
A suggestion on bearings is to try
CBR Bearings (http://www.cbrbearing.com/) in San Diego (800)769-5388. They have lifetime warranty. May not be the cheapest, but everyone says they sell only the highest quality bearings. And still less than at the STealer! They know the ST so you don't need part numbers.
Information provided by
Bill Cruise, STOC 094
ST1100 Dash Bulbs
Information provided by
Dan Schutter, STOC 6662:
Clock Bulb:T1 3/4 wedge base lamp and a #74 from your local parts store
OEM number:
34908-MB9-871 12V 1.7W
#74 MINIATURE BULB GLASS WEDGE BASE - 14.0 Volt 0.10 Amp T-1-3/4 Sub-Miniature Glass Wedge Base,
C-2F Filament Design 0.70 MSCP. 1,000 Average Rated Hours, 0.80" Maximum Overall Length.
Changing the clock bulb:First take off the right (throttle side) mirror cover. Rotate the mirror out of the way. See the white box? That's the back of the clock. See the wire harness going into it at a socket? Reach up through the wheel well looking through the mirror opening. Using the wires, rotate the socket to break it loose then pull it out. Pull the bulb, replace (about $1.75) and reinstall.~~~
Instrument Bulb:OEM Bulb:T3 3/4 wedge base bulb and 1.7 watts
OEM number:
34908-MB9-871 12V 1.7w
Aftermarket bulbs available at auto parts stores:OEM number:
34908-GA7-701 12V 3.4W
#194 MINIATURE BULB GLASS WEDGE BASE - 14 Volt 0.27 Amp 3.8 watts, Miniature Wedge Base, 2.0 MSCP,
C-2F Filament Design. 2,500 Average Rated Hours, 1.06" Maximum Overall Length.
( Also available in various colors at Walmart )
#161 MINIATURE BULB GLASS WEDGE BASE - 14 Volt .19 Amp, 2.7 watts T3-1/4 Glass Wedge Base,
2.66 MSC C-2F Filament Design, 4,000 Average Rated Hours. 1.06" Maximum Overall Length.
~~~
Warning ( Idiot ) Bulbs:T3 3/4 wedges are 3.4 watts
OEM number:
37237-SA5-003 12V 3.4W
Aftermarket bulbs available at auto parts stores:#158 is a T3 3/4 wedge base bulb and is 3.4 watts
#158 MINIATURE BULB GLASS WEDGE BASE - 14 Volt .24 Amp T3-1/4 Glass Wedge Base Miniature Bulb,
2.0 MSC C-2V Filament Design, 500 Average Rated Hours. 1.06" Maximum Overall Length.