Original article can be viewed here:
http://www.wci.ms/JoesST1300/PIAA_Brackets/dick_seng_piaa_lightbracket.htmWritten by
Joe Zulaski, STOC 929~~~
Dick Seng's PIAA 910\912 brackets on an ST1300
(based upon Ron Major's design)
Here are some pictures of the new prototype PIAA 910 light brackets and their installation on the ST1300.
You can reach Dick at
dickseng@attbi.com for more info.
I highly recommend both the brackets from Dick and the PIAA 910 driving light.
Installation is pretty straight forward:1) Remove one bolt from the mirror housing
2) Place bracket up under housing and replace bolt with Allen-head bolt provided with Bracket kit (see pic below).
3) Then measure and cut slot out of plastic mirror cover.
4) Wire PIAA 910 light to bike and you're done.
NOTE(s): The pictures below are of the "prototype" brackets. Current production has these brackets black powder coated.
PIAA brackets and lights before installStripped down mirror assemblyStep 1Step 1a ( Front view )Step 1b: Cutting mirror housingStep 1c: Cutting the fingerStep 2: Cutting mirror housingStep 2a: Cutting mirror housingStep 2b: Testing fitStep 2c: Testing fit front viewStep 2d: The finished cutStep 2e: The finished cut another viewStep 3: Mounting the lightStep 3a: Mounting light close up from beneathStep 3b: Mounting light front viewStep 3c: Mounting light with coverStep 4: Mounting other lightAll finished.