News:

Welcome to the liST! Before Posting,  READ the liST rules stickie post Here! This is a private, STOC-members-only forum. Your real name and STOC# must appear in all posts. Failure to comply with these rules may result in your profile being changed, your account being suspended and/or your posts being removed.

Main Menu

StarCom1, Zumo, radar and 2-way radio set up ( ST1100 \ ST1300 )

Started by KoTAOW, May 18, 2008, 02:45:58 PM

Previous topic - Next topic

KoTAOW

Originally posted by Jeff Bertrand:

Seems like I was answering a lot of PM questions about my comm system configuration.  I decided that a picture is worth a 1000 words and so I produced this diagram for future reference.


Jeff later added:

The StarCom - Zumo specific cables come with isolators integral to them.  In the case of the radar detector, I bought the Escort motorcycle cable with integral GFI transformer.  I could not hear any RD alerts at all without the GFI transformer in-line.




In reply to a question about brackets to use with the Zumo, Joe Urban says look here:
http://www.gpsinformation.org/zumo/zumo.html




Question from Jim Henke:

What are you using for a "2-way radio"? And is it powered off the bike? If so, it's interesting to note you didn't need an isolated (GFI?) cable for the 2-way.

Response from Jeff Bertrand:

I'm using a Kenwood FRS radio running on battery power. No need for isolation if one device is on batts. I can run this radio all the way to WeSTOC and back on one set of 3 AA cells so never bothered with bike power.