News:

If you would like to make a Paypal donation to support this forum, click on this button

Main Menu

Antenna Mounts using Givi© mounting plate ( ST1100\ST1300 ) *

Started by KoTAOW, May 20, 2009, 08:09:48 AM

Previous topic - Next topic

KoTAOW

Original thread can be viewed here:
http://home.insightbb.com/~mmartin36/

written by Mike Martin.

Antenna Mounts using Givi© mounting plate

I purchased a J&M© radio system and needed places to mount the required antennas. Since my bike had a Givi© trunk, I devised a pretty simple mount setup to work with it.

The mounts are made from aluminum stock 1/8" thick and 2" wide. They clamp under the Givi mounting plate. The plate is notched to position the mounts. Rubber strips bonded to the top of the two Givi© brackets and an extra thickness of metal JB Welded to the underside of the Givi plate secure them when the plate mounting bolts are tightened. Since the mounts aren't actually bolted firmly in place, I feel that they could be deflected in the event of a crash, and possibly protect the rider. As a matter of fact, the mount was on the bike when I crashed in May, 2000, and it popped free.

The mounts position the antennas near the front corners of the Givi© trunk. I've had them for several years and haven't had any problems with them.









The last two photos detail the rework to the Givi© mounting plate.





© 2003-2006 M. E. Martin, All rights reserved