Author Topic: Additional Part numbers and Part sources ( ST1100 ) *  (Read 12032 times)

Offline KoTAOW

  • Keeper of the Archive of Wisdom
  • Moderator
  • STrider
  • *****
  • Posts: 465
Additional Part numbers and Part sources ( ST1100 ) *
« on: May 24, 2009, 09:29:41 AM »
John Deere, BMW, and HELLA plugs/sockets

Here's some info on PNs, prices (12-2001), and sources:

John Deere:
RE11344 / PLUG / $19.75
AL25073 / SOCKET OUT / $14.51 (tethered plastic cap)
MG82002966 / SOCKET / $15.17 (spring-loaded 'flip-cap')
  sources: JD lawn tractor and garden equip dealers

Powerlet (Jastek) products:
http://www.powerletproducts.com/

Available from our old friends at Electrical Connection:
http://www.electricalconnection.com/


BMW:
61 13 8 060 106 / ASSC.PLUG  / $9.95
61 12 1 244 589 / STUECK  / $18.74
  sources: BMW M/C dealers

HELLA:
4914 / 2-POLE SOCKET PLUG
4918 / 2 POLE SOCKET
  sources/prices (plug / socket):

 http://www.warmnsafe.com/Heattrollerpricelist.htm

$6.95 / $8.95
 http://www.widder.com/price_a.htm

$6 / $6
 http://www.gr8designs.com/PriceList.html

$6.96 / $7.95
"BMW" type (I suspect they're HELLA):
 http://www.aerostich.com/riderwearhouse.filereader?169156388+EN/catalogs/1178
« Last Edit: December 09, 2012, 05:15:39 PM by Tom Melnik »

Offline KoTAOW

  • Keeper of the Archive of Wisdom
  • Moderator
  • STrider
  • *****
  • Posts: 465
Re: Additional Part numbers and Part sources ( ST1100 )
« Reply #1 on: May 24, 2009, 09:30:46 AM »
Front Wheel Bearings


Honda part numbers:

       1991-1996, standard   and 1992-1995, ABS  42 mm  6004UU
       The 42mm bearing: 91054-MAM-003 / BEARING (6004UU)

       1997-2002, standard   and 1996-2002, ABS  47 mm  6204UU
       The 47mm bearing: 91052-MT3-004 / BEARING (6204UU)

Comment by John Oosterhuis, STOC 1058:
All FRONT ST1100 wheels take the same size and part number on both sides, be they 42mm or 47mm.
However, the wheels use different size SEALS.

All ST1100 wheel bearings have an ID of 20mm.

The rear wheel left side, 47mm, single-row bearing on all ST1100s is the same "6204UU" bearing as is used on front wheels.


~~~

Rear Wheel Bearings

List of interchangeable generic bearings for the ST1100 rear wheel:

    Fafnir                204KPP
    Hoover               99204
    MRC                  204SZZ
    Nachi                 6204-2NSL
    New Departure   99504
    SKF                   6204-2RS
    NTN                  6204LL

The key is the 204, which indicates the size of the bearing. The ND 504 size isn't familiar, either a typo or
ND is trying to pull a fast one on us.

Note:
the two rear bearings are different sizes, and this is for only one of them -- the cheaper one. The other is a dual row bearing.

Part numbers for the double row bearing:

    Honda 91053-MN5-003
    MRC 5204 CZZ

~~~

A suggestion on bearings is to try CBR Bearings in San Diego (800)769-5388. They have lifetime warranty. May not be the cheapest, but everyone says they sell only the highest quality bearings. And still less than at the STealer! They know the ST so you don't need part numbers.

Information provided by Bill Cruise, STOC 094

~~~

Comments by John Oosterhuis, STOC 1058:
The rear wheel left side, 47mm, single-row bearing on all ST1100s is the same "6204UU" bearing as is used on front wheels.

All ST1100 wheel bearings have an ID of 20mm.

The rear wheel right side, 47mm, double-row bearing on all ST1100s is a "5204RS":
91053-MN5-003 / BEARING (20X47X20.6)
« Last Edit: June 01, 2009, 06:41:15 PM by KoTAOW »

Offline KoTAOW

  • Keeper of the Archive of Wisdom
  • Moderator
  • STrider
  • *****
  • Posts: 465
Re: Additional Part numbers and Part sources ( ST1100 )
« Reply #2 on: May 24, 2009, 09:47:10 AM »
Steering Head Bearings - OEM

Generic bearing part numbers are:
Lower set is 32006JR
Upper set is 32005X

The manufacturer of this particular set was MBS (Japan).

NOTE:  The word is that the MBS bearings fit. The Timken 32006X fits in place of the MBS 32006JR but the Timken 32005X and the MBS 32005X do not match even though the p/n's are identical.

~~~

A suggestion on bearings is to try CBR Bearings in San Diego (800)769-5388. They have lifetime warranty. May not be the cheapest, but everyone says they sell only the highest quality bearings. And still less than at the STealer! They know the ST so you don't need part numbers.

Information provided by Bill Cruise, STOC 094
« Last Edit: May 25, 2009, 08:59:00 PM by KoTAOW »

Offline KoTAOW

  • Keeper of the Archive of Wisdom
  • Moderator
  • STrider
  • *****
  • Posts: 465
Re: Additional Part numbers and Part sources ( ST1100 )
« Reply #3 on: May 25, 2009, 08:59:13 PM »
ST1100 Dash Bulbs

Information provided by Dan Schutter, STOC 6662:

Clock Bulb:
T1 3/4 wedge base lamp and a #74 from your local parts store
OEM number:  34908-MB9-871    12V 1.7W

#74 MINIATURE BULB GLASS WEDGE BASE - 14.0 Volt 0.10 Amp T-1-3/4 Sub-Miniature Glass Wedge Base,
C-2F Filament Design 0.70 MSCP. 1,000 Average Rated Hours, 0.80" Maximum Overall Length.


Changing the clock bulb:
First take off the right (throttle side) mirror cover. Rotate the mirror out of the way. See the white box? That's the back of the clock. See the wire harness going into it at a socket? Reach up through the wheel well looking through the mirror opening. Using the wires, rotate the socket to break it loose then pull it out. Pull the bulb, replace (about $1.75) and reinstall.

~~~

Instrument Bulb:

OEM Bulb:
T3 3/4 wedge base bulb and 1.7 watts
OEM number:  34908-MB9-871   12V 1.7w

Aftermarket bulbs available at auto parts stores:
OEM number:  34908-GA7-701     12V 3.4W

#194 MINIATURE BULB GLASS WEDGE BASE - 14 Volt 0.27 Amp 3.8 watts, Miniature Wedge Base, 2.0 MSCP,
C-2F Filament Design. 2,500 Average Rated Hours, 1.06" Maximum Overall Length.
( Also available in various colors at Walmart )


#161 MINIATURE BULB GLASS WEDGE BASE - 14 Volt .19 Amp, 2.7 watts T3-1/4 Glass Wedge Base,
2.66 MSC C-2F Filament Design, 4,000 Average Rated Hours. 1.06" Maximum Overall Length.


~~~

Warning ( Idiot ) Bulbs:
T3 3/4 wedges are 3.4 watts
OEM number:  37237-SA5-003     12V 3.4W

Aftermarket bulbs available at auto parts stores:
#158 is a T3 3/4 wedge base bulb and is 3.4 watts

#158 MINIATURE BULB GLASS WEDGE BASE - 14 Volt .24 Amp T3-1/4 Glass Wedge Base Miniature Bulb,
2.0 MSC C-2V Filament Design, 500 Average Rated Hours. 1.06" Maximum Overall Length.
« Last Edit: May 25, 2009, 09:33:44 PM by KoTAOW »