News:

Welcome to the liST! Before Posting,  READ the liST rules stickie post Here! This is a private, STOC-members-only forum. Your real name and STOC# must appear in all posts. Failure to comply with these rules may result in your profile being changed, your account being suspended and/or your posts being removed.

Main Menu

Radiantz® Mirror Signals ( ST1300 )

Started by KoTAOW, October 19, 2011, 06:50:20 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

KoTAOW

October 19, 2011, 06:50:20 AM Last Edit: October 19, 2011, 06:53:04 AM by KoTAOW
Original article can be viewed here:
http://koczarski.com/ST1300/TurnSignals/Signals.htm

Written by by Adam Koczarski, STOC #265:

~~~

Radiantz® Mirror Signals ( ST1300 )

The LED array is about 1.5" long. Clear plastic with amber LEDs.
You can order them here at Radiantz®.


I routed the wires as shown through the holes in the mirror support.


Here are the signal wires. The green is ground and the solid colored wire in the other connectors is the positive lead.


I used  Posi-Lock® connectors to make the required connections.


The finished product. It's a time lapsed photo without a tripod. Not too clear. Sorry!! They are nice and bright though!


~~~

Thank You again for your contribution Adam Koczarski, STOC #265
Print
Go Up Pages1
User actions